Solar Inverter

EAPRO 20 KVA 3 Phase Solar Hybrid PCU Price

EAPRO 20 KVA 3 Phase Solar Hybrid PCU Price

EAPRO 20 KVA 3 Phase Solar Hybrid PCU have Intelligent system with DSP Controller which enables it to handle multiple algorithms efficiently. Type of Inverter -TRUE HYBRID (Dual Input Source DC Type). This Solar Hybrid UPS have inbuilt Real Time Clock for providing the optimum performance of the Solar inverter for Maximum Power Saving.
Power Control type (Device) – IGBT Inbuilt isolation transformer to protect from grid surges and noise

Provision for setting of critical parameters like Time, Boost Battery Voltage, Solar Max charging current, Battery Low Cut voltage etc. Provision for Setting of 4 different Saving Levels according to the User Requirement including,Full Time Charging from the Grid,No Mains Charging etc. Provision for maintaining the gravity of the battery once in a month.

Specification

Model Eapro 20KVA-3PHASE
Capacity (VA/ WATT) 20000 VA / 16000W
Type of Inverter TRUE HYBRID (Dual Input Source DC Type)
Nominal Input Battery Volt. 360 V
Full load output current 23.0A per phase
Output frequency 50 Hz
Output voltage 400 V ± 2% 3 phase
Warranty 24 Months
Switching Elements High Power new generation MOSFET

Solar UPS

Type PWM
Solar Panel VOC 600 V
Max. Panel Current 70 A
Maximum PV Power [70.0 Amp x (Specified Vdc x 1.5)] Wp
Input Voltage Range (Vmp) 450 V TO 510 V
Charging Current Normal / High
Overload Indication Buzzer beep
Protection Dual MCB
MPPT Efficiency above 90 %

Physical

Dimensions (L*W*H) [mm] 1020X400X1130
Supported Battery Types Flat,Tubular, VRLA(SMF)

Product Description

  • Rated AC Power – 20000 VA
  • Output Voltage- 400V ± 2 % 3 phase
  • Full load Output Current- 23.2 A per phase
  • Max Supported Panel Power – [70.0 Amp x (Specified Vdc x 1.5)] Wp,
  • Input Voltage Range (Vmp) – 450 V TO 510 V
  • Max Input Voltage Range (Voc) – 600 V
  • Charge Controller –PWM
  • Nominal Battery Bank Voltage – 360V (Support 30 Batteries)
  • 24 Months Warranty.
  • Provision for setting of critical parameters as per user requirement like Time, Boost Battery Voltage, Solar Max charging current, Battery Low Cut voltage etc.
  • Efficient Current Charging at Low Mains in Normal Mode only.
  • Intelligent Battery Charging and Charge Sharing with Mains/Charging by solar power only.
  • Dual Charging current option for Normal Charging and High Charging.
  • High Power new generation MOSFET/IGBT capable of handling high inrush/surge current.
  • Display Load Sharing from Solar
  • Inbuilt fully regulated charge controller.

Extra Features

  • Overload Indication:
    105-150%:Buzzer beep after every 30Sec for 5sec
    >150%:Continuous Buzzer beep
  • User friendly multicolour LCD Display for time,charging current, Supply etc.
  • Dual MCB protection against short circuit protection for AC and DC.
  • Pure sine wave output for safety and distortionless operation of connected appliances.
  • Hybrid charging : Charging from both mains and solar.
  • Selectable source priority: Choose source priority from solar, battery and grid.
  • Compliance to IEC standards for safety, reliability and quality.
  • Remote Monitoring and Controlling of PCU through Wifi/ LAN/ GPRS/Android App(Optional).

Disclaimer: The Price & Specs Shown May Be Different From Actual. Please Confirm  Before Purchasing.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button