Solar Inverter

Odin 4 Ever 10 KVA Solar UPS Price Specification

Odin 4 Ever 10 KVA Solar UPS Price Specification

Odin 4 Ever has an in-built solar charge controller that assures maximum solar power is generated and allows you to save more on your electricity bills. The auto-features make sure that the inverter automatically switches to solar & battery mode as soon as there is a power cut, while during the day time solar power directly powers your home load to provide you maximum savings.

With its pure sine wave output, this compact solar hybrid inverter fully assures that modern electronics like computers and audio/visual equipment, or any other sensitive load, will be powered without any problems.

Solar Charge Controller

Capacity 10000 VA
Input voltage max Voc 235 V DC
Max PV Support 7500 W
Operating DC voltage 120 V
Parallel strings 5 of (300 watt + 300 watt+ 300 watt+ 300 watt+ 300 watt)
Type of solar charger PWM
Max current Rating 50 A
Efficiency > 90 %

Inverter

Nominal Output voltage in inverter 220 V ± 7 V
Nominal Frequency (in inverter 50 ± 1 Hz
Frequency (Min – Max during Grid by 47 – 53 Hz
Frequency (Min – Max during Inverter 40 – 60 Hz
Output voltage regulation 180 – 220 %
Output THD (v) at linear-load <5 %
Crest Factor 3:01
Overload capacity 125% 6 Sec. 6 Try
Overload capacity 150% 2 Sec. 6 Try
Cooling Fan ON at temp 60 °C
Cooling Fan Off at temp 55 °C
Peak efficiency of inverter 84 %

Battery

Battery low voltage alarm per battery 10.8 ± 0.1
Battery low voltage cut per battery 10.5 ± 0.1 V
Batter low cut recovery per battery 12.7 ± 0.1 V
Max Battery charging voltage by grid 14.4 ± 0.1
Max Battery charging current by grid 16 ± 2 A
Max Battery charging voltage by Solar 14.4 ± 0.1 V
Battery High cut with Alarm per 14.8 ± 0.1 V
Battery High cut Recovery per battery 14.3 ± 0.1 V
Max Battery charging current by Solar 25 ± 2A
Max Charging current to battery by 25 ± 2A

Other Parameters

Selection of Operating Mode HC – Charging Current / EC-Charging Current
Output Voltage at No load at rated 220 V
Input current at no load at Nominal 2.4 A
Noise @ 1 meter <50 dB
Protections Overload, Battery Low, Battery High, Output Short Ckt., Battery Reverse, Phase Reverse, Over Heat, Over frequency, Under Frequency, SPV High.
LCD Display parameters Battery Voltage, Charging Current, Grid Voltage, Grid Frequency, Output Voltage, Output Frequency, Load%, Battery Graph, Overheat, SPV Current, Working Mode(HYB/PCU/SMT).
Indication LEDs Mains status, Mains Charging , Solar
Operating.Temperature range 0-50 °C
Storage Temperature range 0+65 °C
Max RH 95%

Other Parameters

Front panel details (MCB, Display, Display with Push Button switch
Rear panel details (MCB, Terminals O/P Socket, Fuse, Main & battery Cable and fan
Enclosure protection IP20
Change over time from inverter to <10
Change over time from inverter to <10
Change over time from mains to <10
Change over time from mains to <40

Other Parameters

Battery connection thru Copper cable 10 sq. mm
Mains connection 3 Core copper cable size 0.75 sq. mm , 1.5 mtr
Output 3 Pin Socket 16 amp
Fuse in Solar Path Yes
Input Protection Fuse

Features

  • Solar priority
  • Intelligent charging sharing
  • DSP based technology
  • Compatible with generators
  • Dt – 6s stage battery charging technology
  • Turbo charging
  • Led & lcd notifications
  • Powerful charging in low voltage*

Disclaimer: The Price & Specs Shown May Be Different From Actual. Please Confirm Before Purchasing.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button