Bluebird BBS 1050 PWM Solar Inverter Price

On May 13, 2020 0

Bluebird solar inverter is a combination of an inverter, battery charger & transfer switch into one complete system. The inverter allows optimizing the solar power having extremely low idle current & has option of remotely monitoring the power and battery which helps customers to evaluate the performance of the solar system.

The Solar Inverter is a critical component in solar energy system. It performs the conversion of variable DC Output of Photovoltaic (PV) modules into a clean sine Wave of 50 Hz AC current that is applied directly to the commercial electrical grid or to a local of grid solar network

Model	BBS 1050
Capacity	1050 VA
Battery	12 V
solar panel capacity	600 W
Solar.charge.controller rating	30 A
Output/voltage	230 V ac
User selection mode	UPS / inverter Mode
Charging logic	On priority the system will charge from solar still sufficient solar current is available when solar current drop to below set. Then shared charging is activated and to balance current is taken from grid
Warranty	1 Year

Input Parameter

	UPS Mode	Inverter Mode
Acceptable voltage range	185 – 265 Vac	110-290 V
Low voltage cutoff	180 ± 5 V	110 ± 10 V
Low voltage recovery	190 ± 5 V	120 ± 10 V
High Voltage cutoff	265 ± 5 V	290 ± 10 V
High Voltage recovery	255 ± 5 V	275 ± 10 V
frequency	50 ± 5 Hz	50 ± 5 Hz

output parameters

Voltage.Regulation.on.Mains	Same As Input
Voltage regulation in battery mode	220 V ac
Mains mode frequency	Same As Input
Battery mode frequency	50 Hz
Waveform	Pure Sine Wave
Efficiency	≥82 %
LED display indications	Mains ON(RED); Charging On Mains(RED); Charging On Solar(GREEN); Solar + Grid Charging (YELLOW); Inverter Mode (GREEN); Battery Low(YELLOW); Overload/Short Circuit(YELLOW)
LCD display parameter	Battery Voltage; 1/P Voltage; I/P Frequency; O/P Voltage; Grid Charging Current; Solar Voltage; Solar Charging Current; Solar Units Saved KWH(up to 999.9Units); Grid Priority/Solar Priority; Load %; Over Load; Battery Low;

Protection

Overload	100% Load – Buzzer Indication > 100% – Load Trips & Inverter Retries 4 times before shutdown
Output short circuit	Circuit Breaker On Mains, Shutdown on Inverter
Battery reverse production	Fuse
Low battery	Load Disconnection
Surge	Protected upto 4KV Surge
Solar Reverse	Blocking Diode is provided to Prevent reverse flow of current

Priority setting

Grid priority	Battery is charged from solar+ grid, grid charging start only when solar current is less than set value, it will shift to inverter mode when battery is full charge from solar.
Solar.Priority	battery is charged only from solar, when battery is completely discharge and Solar is not available then only it will connect to grid and shared charging is activated till battery is full.