UTL Alfa Solar PCU 10 KVA 120V Price Specification
UTL Alfa Solar PCU 10 KVA 120V Price Specification
ALFA PCU is a Model of Power Conditioning Unit (PCU) which uses Solar (primary) and Grid (secondary), to charge the batteries. Since usage of power from grid is secondary, grid power is only used when solar energy is not present and battery voltage level reduces to 11.5V/Battery (Default 11.5V, Configurable).
Grid power is also needed when solar power generation is less and battery voltage is reduced to 11.5V/Battery (Default 11.5V, Configurable).
MPPT based solar charger extracts the maximum power from the solar panels whereby it increases the efficiency of the system. MPPT charger has multistage charging which maintains the battery charging voltage such that it increases the lifespan of battery.PCU (Power Conditioning Unit) is an integrated unit consists of grid charger, inverter, MPPT Solar Charger. It continuously monitors Battery and Solar voltage as well as Grid and Output voltage with their currents.
Specifications
Model | UTL Alfa 10 KVA 120 V |
Capacity | 10000 VA |
Operating DC Voltage | 120 V |
Switching Element | IGBT |
Warranty | 2 Years |
Solar
Switching Element | IGBT |
Type of Charger | PWM with MPPT |
Efficiency | ≥ 95% |
Input Voltage Range (Min – Max)Voc | 255 V – 450 V |
Maximum PV Power Recommended | 10000 Watt |
Battery
Battery Required | 12 V X 10 ( 120 v ) |
Grid Disconnect (Solar Available) | @14.5/Battery for 2 minutes or 13.5/Battery-100% Current |
Grid Connect (PCU Mode/Smart Mode) | 11.5 V |
Temp. Compensation | @3mV/cell ; 18mV/Battery |
Battery Connection | 10 Battery of 12 V Connection in Series |
Grid
Nominal Grid Voltage | 230 V |
Battery Low Buzzer | 11.2 V |
Battery Low Cut | 11 V |
Battery High Cut | 15.5 V |
Solar Panel Charging Voltage | 14.5 V |
Solar Panel Current | 18 A |
Grid Charging Voltage | 13.2 V |
Grid Charging Current | 10 A |
Grid Reconnect @ Battery Voltage | 11.8 V |
Grid Low Cut Voltage – It Mode | 175V±10V (ENABLE) , 120V±10V (DISABLE) |
Grid High Cut Voltage – IT Mode | 255V±10V (ENABLE) , 280V±10V (DISABLE) |
IT Load | Enable/Disable |
Operating Mode | Smart/PCU/Hybrid |
Output Voltage Low | 185 V |
Output Voltage High | 260 V |
Inverter
Output Phase | Single Phase |
Nominal Output Voltage | 220 V* |
Nominal/Frequency | 50 Hz* |
Load Power Factor | 0.8 |
Output/Waveform | Sine wave |
Typical Efficiency | ≥82% |
Load Current | 9 |
Output Voltage Distortion with 100% Linear Load | <3% |
Overload Capacity (IT LOAD DISABLE) | 100-120 % (3time auto reset) : 60sec 120-150 % (3time auto reset) : 30sec 150-200 % : 2sec 200-300 % : 1sec 300-400 % : 250ms |
Overload Capacity (IT LOAD ENABLE) | 100-110 % : 10 Min 110-120 % : 2 Min 120-150 % : 30sec 150-200 % : 2Sec 200-300 % : 1Sec 300-400 % : 250ms |
Protection | Overload, Battery Low, Battery High, Output Low, Output High, Output Short Ckt., Overheat, Under Frequency, Over Frequency, Solar Panel Reverse |
LED Indication | System ON, Inverter ON, SPV Charging, Grid Charging, Battery Low/High, Overload, Overheat, Mains Low, Mains High, Under Frequency, Over Frequency, NLSD |
Switches | Reset for System ON/OFF, UP, Down, Back, Enter(For LCD Calibration) |
Display | Battery Voltage, Charging Current, Discharging Current, Charging KWH, Discharging KWH, Solar Voltage, Solar Current, Instantaneous Power, Cumulative Power, Grid Voltage, Grid Current, Grid Frequency, Output Voltage, Output Current, Output Frequency |
Environment
Operating Temperature | 0-50°C |
Cooling | Fan |
Max. Relative Humidity @25°C (non Condensing) | 95% |
Noise @ 1meter | 60db |
Standard Compliance | IP20 |
Dimension (LxWxH) Inch | 24 X 13 X 23 |
Weight | 60 Kg |
FEATURES
- Upto 30% more Efficient because of rMPPT Charge Controller.
- Advance DSP Based design Pure Sine Wave.
- NLSD & Grid Charging – Enable/Disable by LCD.
- Tested as per IEC 61683 and IEC 60068-2-(1,2,14,30) standards.
- USB/Ethernet based monitoring with 30 days data storage, DC and AC energy meter.
- User Configurable Parameters.
- Lightening, Surge Protection.
- Short Circuit Protection.
- Intelligent Charge Sharing.
n UTL’s Alfa PCU you have a great feature that is battery seletion mode by this we can select any type of battery as per requirement i.e Flat plate/Tubular/SMF/Lead acid Battery and can set charging voltage and charging current as per requirement.
Operating Mode Selection
PCU Mode – Priority Solar →Battery → Grid
Smart Mode -Priority Solar → Grid → Battery
Hybrid Mode – Priority for load Grid →Solar →Battery , Priority for battery charging Solar → Grid
Disclaimer: The Price & Specs Shown May Be Different From Actual. Please Confirm Before Purchasing.