UTL Heliac 1050 Solar Inverter Price In India

On Apr 28, 2020 0

Solar Home PCU (Heliac) is a solar hybrid inverter which utilizes both the Solar Power and Grid Power to charge the batteries with giving priority to solar power. Solar power is of the first priority while charging. This means that when Solar power is available, the batteries will be charged with it only, irrespective of whether Grid power is available or not. It is designed to give you the maximum advantages from the Sun and thereby reduces your Electricity costs.

Home PCU gives first priority to Solar power over Grid power during charging. It means that when Solar power is available, the batteries will be charged through Solar Power whether Grid Power is available or not. It goes to Grid power only when Solar Power is unavailable. Thus it helps in reducing electricity costs along with keeping the environment clean.

Specifications

Model	Heliac 1050
Capacity	850 VA
Operating DC Voltage	12 V
Switching Element	MOSFET
Charger Topology	BOOST MOSFET

Solar

Switching Element	MOSFET
Type of Charger	PWM
Efficiency	≥95%
Input Voltage Range (Min – Max)Voc	17V-25V
Maximum PV Power Recommended	600 Watt

Grid

Nominal Grid Voltage	230 V
Battery Low Buzzer	10.8 V
Battery Low Cut	10.5 V
Battery High Cut	16.5 V
Solar Panel Charging Voltage (Boost)	13.7 V (SMF) , 15 V (TUB)
Solar Panel Charging Voltage (Float)	13.7 V (SMF) , 14.2 V (TUB)
Solar Panel Current	50 A
Grid Charging Voltage (Boost)	13.5 V (SMF) , 14.5 V (TUB)
Grid Charging Voltage (Float)	13.5 V (SMF) , 13.8 V (TUB)
Grid Charging Voltage (Equalize)	After 30Days
Grid Charging Current	15 A / 18 A
Grid Reconnect @ Battery Voltage	11.8 V
Grid Low Cut Voltage	170V±10V (ENABLE) , 100V±10V (DISABLE)
Grid Low Cut Recovery	180V±10V (ENABLE) , 110V±10V (DISABLE)
Grid High Cut Voltage	265V±10V (ENABLE) , 290V±10V (DISABLE)
Grid High Cut Recovery	255V±10V (ENABLE) , 280V±10V (DISABLE)
Changeover (Battery to Mains)	<5ms
Changeover (Mains to Battery)	<10ms (ENABLE) , <80ms (DISABLE)

Inverter

Output Phase	Single Phase
Nominal Output Voltage	220 V*
Nominal Frequency	50 Hz*
Load Power Factor	0.8
Output Waveform	Sine wave
Typical Efficiency	≥82%
Voltage Harmonic	<3% (Linear Load)
Over Load Capacity	>110% 3Time Auto Reset, 4th Time Shut Down , >150% Output Goes Down
Protection	Overload, Battery Low, Battery High, Output Short Ckt., Battery Reverse, Phase Reverse, Over Heat, Over frequency, Under Frequency, SPV High.
LED Indication	System ON, (IT Mode, SMF/TUB, Boost Chg., DG Mode, Grid Chg.) Enable/Disable
Switches	Reset for System ON/OFF, UP, Down, Back, Enter(For LCD Calibration)
Display	Battery Voltage, Charging Current, Grid Voltage, Grid Frequency, Output Voltage, Output Frequency, Load%, Battery Graph, Overheat, SPV Current, Working Mode(HYB/PCU/SMT).