UTL MSCC 1230 MPPT Solar Charge Controller Price
Solar charge controller is an advanced Maximum Power Point Tracking battery charger for Photo-Voltaic (PV) systems. The controller features a smart tracking algorithm that maximizes the energy harvest from the PV and also provides load control to prevent over-discharge of the battery.
There are a number of protections that the Solar Charge Controller ensures. Solar Charge Controller stops reverse current flow from battery to solar array, it provides load short circuit protection, it provides Battery/Panel reverse protection through DC fuse and Overload protection also.Solar charge controller is an advanced Maximum Power Point Tracking battery charger for Photo-Voltaic (PV) systems.
Adding Solar PV is the logical way to extend the back up hours and reduce electricity bills- but must be done the right way. Add too little PV Watts-the Solar addition does not really serve the purpose of long back up. Size up your day time loads and add at least enough Solar PV to take care of day time loads. However, here is the nub, if you add enough Solar PV to take care of day time loads, the power available from the PV panels can exceed the safe charge rate to the batteries.
|Model||UTL MSCC 1230|
|Precise Control||Micro Controller Based|
|Max Panel Support||400 W|
|Panel Max VOC||22.5 V|
|Operating Range||18V – 22 V|
|Low Cut Recovery||17V±0.2V|
|Nominal Voltage||12 V|
|Over Charging Current||Yes|
|Over Charging Voltage||Yes|
|SPV Reverse Polarity||Yes|
|Battery Reverse Polarity||Yes|
|Output Short Circuit||Yes|
|Reverse Current Flow at Night||Yes|
|Cabinet Dimension, L x W x H (mm)||180x220x85|
|Placement||Horizontal / Indoor|
|Operation Temperature||0°C to 50°C|
|Storage Temperature||-10°C to 70°C|
|Max. Relative Humidity (Non Conditioning)||5% to 95%|
When the energy from the Solar panels are servicing the loads or when both the sources of energy (Solar and Grid through the Inverter) are charging the batteries, the charge current to the batteries can be higher than what is safe for the batteries. With its unique NET CURRENT to battery monitoring and control MPPT ensures that the charge rate to the batteries is maintained at all times within its safe limits, preventing premature failure of the batteries.
- Save Money with UTL rMPPT Technology.
- Protection from Battery Over Voltage and Current.
- Protection from load short circuit to keep your system safe in lower rating.
- Multiple charging stages to maintain battery gravity.
- Remove build-up sulphate to increase battery life.
- Run DC Load with UTL Solar Charge Controller in lower rating only.
- Protection from reverse flow of current from battery to panel.
- Lightening and surge protections.
Disclaimer: The Price & Specs Shown May Be Different From Actual. Please Confirm Before Purchasing.