Vispra Primo 7.5 Kva Solar PCU Price Specifications
Vispra solar energy pvt ltd is a Startup recognized in leading Solar Off-Grid MPPT PCU manufacturer making India self-sufficient on solar energy. We use advanced MPPT technology in our Solar Off-Grid PCU that can simultaneously run the load and charge the battery. Suitable for standard Lead-Acid Batteries, as well as Flooded, Sealed and SMF type. Our Solar Off-Grid MPPT PCU stand apart from the rest because of their high-quality design and multiple features we have packed into it to make your life easier.
DSP micro controller based design – UPS is capable of running standalone on solar power – Can be used as a normal inverter until solar panel connection – Can operate on both solar and grid power – UPS always gives preference to solar power – Robust design – 20 years design life – Compliance to international standards – Rugged design and engineering for continuous use – Automatic changeover on power failure and resumption – Multi functional LED indicator and sound alarm – PC interface & web based software monitoring* – Smart overload sensor with auto reset – Intelligent thermal management – LED / LCD digital display.
Specifications
Model |
Primo 7500 Va |
Capacity (VA/Watt) |
7500 Va / 6000 w |
Battery VDC |
120 V |
Max Panel Capacity |
6000 W |
Charge Controller Amps |
50 A |
Charge Controller Type |
MPPT |
Mode-Selection |
Solar-Grid-Batt / Solar-Batt-Grid |
Input
Acceptable Voltage Range |
180~ 260 V (UPS Mode) / 120 ~ 290 V (Wide Mode) |
Frequency |
47 Hz ~ 53 Hz |
Low Voltage Transfer |
180 V ± 5V (UPS Mode) / 120 V ± 5V (Wide Mode) |
Low Voltage Return |
190 V ± 5V (UPS Mode) / 130 V ± 5V (Wide Mode) |
High Voltage Transfer |
260 V ± 5V (UPS Mode) / 290 V ± 5V (Wide Mode) |
High Voltage Return |
250 V ± 5V (UPS Mode) / 283 V ± 5V (Wide Mode) |
Output
Voltage Regulation Mains Mode |
Same as input |
Voltage Regulation Battery Mode |
220 V |
Frequency Regulation Mains Mode |
Same as input |
Frequency Regulation Battery Mode |
50 Hz ± 0.1 Hz |
Power Factor |
0.8 |
Waveform |
Pure Sine wave |
Efficiency |
65 – 92% |
Overload Protection Line Mode |
Fuse |
Overload Protection Battery Mode |
110% ~ 120 % for 10 sec |
Short Ckt. Protection Line Mode |
Fuse |
Short Ckt. Protection Battery Mode |
Electronic Shutdown |
Solar Inverter Hybrid Mode
With both mains power present and solar present (power Save mode) |
Battery Fully charged |
Automatic Change over to Backup mode and runs on Solar, if solar not sufficient excess is taken from the battery until battery discharge below 11.95v. |
Battery discharge below 11.95 volts |
Returns to mains utility power and charges the battery using only solar. When again
the battery is fully charged – repeats above function. |
With Mains power present and Solar Absent |
Returns to mains utility power and charges battery using Mains utility power |
Solar Charger
Solar Prefer mode (with mode Switch TOP) |
Only charges through solar when solar present, if Solar absent then charges through Utility power (charging LED glow continuous) |
Dual Mode (with mode switch Down) |
Charges both from Mains utility power and Solar (charging LED blink) |
LED Display
Solar IN, Mains ON, Inverter ON, Charged / Charging, Battery Low, Over Load, Over Temperature, Inverter Fault, Phase reversal , Short Circuit |
LCD Display* Specific Models |
Input Voltage, Output Voltage, Battery Voltage, Load, Solar Voltage, Solar Amps, Solar KW |
Protection Features
Audible Alarm |
Battery High/Low/ Bad, Phase reverse, Overload, Short circuit, Output Bad & Over Temperature |
Protection |
Battery Low/ Hight/Over charge, Overload, Over Temperature, Short Circuit, Phase reverse / Battery reverse – DC fuse fails on PCB |
Features
- DSP micro controller based design
- UPS is capable of running standalone on solar power
- Can be used as a normal inverter until solar panel connection
- Can operate on both solar and grid power
- UPS always gives preference to solar power
- Robust design – 20 years design life
- Compliance to international standards
- Rugged design and engineering for continuous use
- Automatic changeover on power failure and resumption
- Multi functional LED indicator and sound alarm
- PC interface & web based software monitoring*
- Smart overload sensor with auto reset
- Intelligent thermal management
- LED / LCD digital display*
- No load auto shutdown
Disclaimer: The Price & Specs Shown May Be Different From Actual. Please Confirm Before Purchasing.