Flinslim Dual MPPT 5KVA 48V Solar Hybrid Inverter Price
Flinslim Dual MPPT 5KVA 48V Solar Hybrid Inverter Price
Flin Energy introduces upgraded range of FlinSlim MPPT Solar Hybrid Inverters. These are ideal for people with heavy motor loads like air conditioners, water pumps, etc. or face long hours of power cuts. With bigger size of solar array capacity, these high efficiency inverters allow you run all your load on solar.
These high efficiency solar inverters come with two built-in MPPT solar charge controllers in Dual model and three built-in MPPT solar charge controllers in Trio model. This assures maximum solar power generation during the day, thus allowing you to save more on your electricity bills or go completely off-grid. You can connect multiple such inverters in parallel to go up-to a maximum inverter load of 30kVA and solar panel capacity of 54kW thus allowing you to power your home, office or a farm completely on solar power.
Specifications
| MODELS | FlinSlim Dual MPPT 5 kVA-48V |
| RATED POWER | 5000VA / 5000W |
Solar
Before connecting to PV modules, please install separately a DC circuit breaker between inverter
and PV modules.
It’s very important for system safety and efficient operation to use appropriate cable for PV module connection. To reduce risk of injury, please use the proper recommended cable size as below.
- Wire Size 6 AWG
- Cable 10 mm
- Torque value（max） 1.6 Nm
| Maximum PV Array Open Circuit Voltage | 145 VDC |
| Maximum Solar Charge Current | 120 A |
| Number of MPPT Trackers | 2 |
| Max Panel Support | 6000 W |
Input
It’s very important for system safety and efficient operation to use appropriate cable for AC input
connection. To reduce risk of injury, please use the proper recommended cable size as below.
- 8 AWG (Gauge)
- Cable 10 mm ,
- Torque Value (1.6)
| Voltage | 230 VAC |
| Selectable Voltage Range | 170-280 VAC (For Personal Computers); 90-280 VAC (For Home Appliances) |
| Frequency Range | 50 Hz/60 Hz (Auto sensing) |
Output
| AC Voltage Regulation
(Battery Mode) |
230 VAC ± 5% |
| Surge Power | 10000VA for 5 secs |
| Efficiency (Peak) | 90% |
| Transfer Time | 10 ms (For Personal Computers) ; 20 ms (For Home Appliances) |
| Waveform | Pure Sine Wave |
Battery
5KVA model supports 48VDC system. Connect all battery packs as below chart. It’s suggested to connect at least 200Ah capacity battery for 5KVA model
| Battery Voltage | 48 VDC |
| Floating Charge Voltage | 54 VDC |
| Overcharge Protection | 60 VDC |
Physical
| Dimension, D x W x H (mm) | 187 x 295 x 508 |
| Net Weight (kgs) | 15 |
Environment
| Humidity | 5% to 95% Relative Humidity(Non-condensing) |
| Operating Temperature | -10°C – 50°C |
| Storage Temperature | -15°C – 60°C |
Monitoring
| Communication Ports | RS232, USB, Dry Contact |
| Monitoring Software | Included |
FlinSlim line of inverters are different from the traditional solar inverters available in the market. Traditional solar inverters use solar power to charge the batteries and then the batteries power the load. FlinSlim inverters are one of the few solar inverters that can power the load directly from solar power without using the battery power or grid power. This mechanism helps greatly in increasing the efficiency of the solar solution and reducing costs
Features
- Pure sine wave inverter with up-
to 93% peak efficiency
- Built-
in double (dual model) or triple MPPT solar charge controllers (trio model)
- Generates 25-
30% more power than our FlinSlim PWM model
- Double surge power capacity
- Wide battery input range
- Advanced monitoring software included
- Selectable input voltage range based on appliances
- Auto restart function and cold start functions
- Overload and short circuit protection
- USB and / or RS232 communication ports
- Advanced battery charger for improved battery performance
- Connect up-
to 30kVA of load and maximum of 54kW of solar panels with 5kVA model
Disclaimer: The Price & Specs Shown May Be Different From Actual. Please Confirm Before Purchasing.