UTL MSCC 24030 MPPT Solar Charge Controller Price

On Apr 29, 2020 0

The Solar charge controller based on rMPPT technology . The controller features a smart tracking algorithm that maximizes the energy harvest from the PV and also provides load control to prevent over-discharge of the battery. Extra power gathered from the modules is then made accessible as increased battery charge current. With rMPPT innovation the charge efficiency can be expanded by up to 30%, reducing the size of the array required and saving on installation costs .

Adding Solar PV is the logical way to extend the back up hours and reduce electricity bills- but must be done the right way. Add too little PV Watts-the Solar addition does not really serve the purpose of long back up. Size up your day time loads and add at least enough Solar PV to take care of day time loads. However, here is the nub, if you add enough Solar PV to take care of day time loads, the power available from the PV panels can exceed the safe charge rate to the batteries. The charge rate to the Lead acid batteries MUST be limited to 10-15% of the battery AH and UTL does this while providing sufficient power to the loads.

Specifications

Model	UTL MSCC 24030
Technology	MPPT/PWM
Precise Control	Micro Controller Based
Switching Device	IGBT
Efficiency	>95%

Solar Panel

Recommended Panel	36-Cells, 60-Cells, 72-Cells
Max Panel Support	7500 W
Panel Max VOC	450 V
Operating Range	340V-449V
Low Cut	192V±1V
Low Cut Recovery	272V±1V

Battery

Nominal Voltage	240 V
Charging Current	30 A
Bulk/Boost Voltage	290V±1V
Absorption Voltage	288V±1V
Float/Trickel	270V±1V
Equalize Voltage	330V±1V
Equalize Period	28 Days

Protection

Over Charging Current	Yes
Over Charging Voltage	Yes
SPV Reverse Polarity	Yes
Battery Reverse Polarity	Yes
Output Short Circuit	Yes
Overload	Yes
Reverse Current Flow at Night	Yes
Lightning/Surge Protection	Yes

Physical

Cabinet Type	Metallic
Cabinet Dimension, L x W x H	135X130X75 (mm)
Weight	0.55 Kg
Cabinet Color	Gray
Placement	Horizontal / Indoor

Environment

Operation Temperature	0°C to 50°C
Storage Temperature	-10°C to 70°C
Max. Relative Humidity (Non Conditioning)	5% to 95%
Ingress Protection	IP-20

When the energy from the Solar panels are servicing the loads or when both the sources of energy (Solar and Grid through the Inverter) are charging the batteries, the charge current to the batteries can be higher than what is safe for the batteries. With its unique NET CURRENT to battery monitoring and control MPPT ensures that the charge rate to the batteries is maintained at all times within its safe limits, preventing premature failure of the batteries.