Vispra Star 1 Kva PWM Solar PCU Price Specifications

On May 18, 2020 0

Vispra Star PMW PCU has been manufactured by using world-class technology platform and process as an efficient solution for areas struggling with frequent power cuts. It can be used for domestic, industrial and other events. It provides clean energy for residential and industrial areas without any residual effect.

It has a self-adjustable setting which provides superlative performance in all weather conditions. It has profound mixing of grid current with solar in case of solar energy insufficiency during cloudy days. It consists an inverter, solar charge controller, AC charger and remote control (optional). Vispra Star Off-Grid PWM PCU is superb for installation in petrol pumps, gas stations, schools, commercial, and residential applications.

Specifications

Model	Star 1000 Va
Capacity (VA/Watt)	1000 Va / 800 w
Battery VDC	12 V
Max Panel Capacity	600 W
Charge Controller Amps	40 A
Output Voltage	230 Vac
Selectable Mode	UPS Mode / Wide Mode

Input

Acceptable Voltage Range	180~ 260 V (UPS Mode) / 120 ~ 290 V (Wide Mode)
Frequency	47 Hz ~ 53 Hz
Low Voltage Transfer	180 V ± 5V (UPS Mode) / 120 V ± 5V (Wide Mode)
Low Voltage Return	190 V ± 5V (UPS Mode) / 130 V ± 5V (Wide Mode)
High Voltage Transfer	260 V ± 5V (UPS Mode) / 290 V ± 5V (Wide Mode)
High Voltage Return	250 V ± 5V (UPS Mode) / 283 V ± 5V (Wide Mode)

Output

Voltage Regulation Mains Mode	Same as input
Voltage Regulation Battery Mode	220 V
Frequency Regulation Mains Mode	Same as input
Frequency Regulation Battery Mode	50 Hz ± 0.1 Hz
Power Factor	0.8
Waveform	Pure Sine wave
Efficiency	65 – 92%
Overload Protection Line Mode	Fuse
Overload Protection Battery Mode	110% ~ 120 % for 10 sec
Short Ckt. Protection Line Mode	Fuse
Short Ckt. Protection Battery Mode	Electronic Shutdown

Solar Inverter Hybrid Mode

With both mains power present and solar present (power Save mode)	Battery Fully charged	Automatic Change over to Backup mode and runs on Solar, if solar not sufficient excess is taken from the battery until battery discharge below 11.95v.
	Battery discharge below 11.95 volts	Returns to mains utility power and charges the battery using only solar. When again the battery is fully charged – repeats above function.
With Mains power present and Solar Absent	Returns to mains utility power and charges battery using Mains utility power

Solar Charger

Solar Prefer mode (with mode Switch TOP)	Only charges through solar when solar present, if Solar absent then charges through Utility power (charging LED glow continuous)
Dual Mode (with mode switch Down)	Charges both from Mains utility power and Solar (charging LED blink)

LED Display

Solar IN, Mains ON, Inverter ON, Charged / Charging, Battery Low, Over Load, Over Temperature, Inverter Fault, Phase reversal , Short Circuit
LCD Display* Specific Models	Input Voltage, Output Voltage, Battery Voltage, Load, Solar Voltage, Solar Amps, Solar KW

Protection Features

Audible Alarm	Battery High/Low/ Bad, Phase reverse, Overload, Short circuit, Output Bad & Over Temperature
Protection	Battery Low/ Hight/Over charge, Overload, Over Temperature, Short Circuit, Phase reverse / Battery reverse – DC fuse fails on PCB